Downloads
There are currently no downloads for this product
Kee Klamp
Designed to give a 90° offset crossover joint. Frequently used on safety
railing, where, to reduce cost by minimizing the tube cuts, a continuous
horizontal rail is used. Designed to give a 90 degree offset crossover joint.
Frequently used on safety railing utilising a continuous horizontal rail,
minimising tube cuts to reduce costs. Type L45 may also be used to allow
intermediate levels on racks. Note: Tube cannot be joined within this fitting.
It may be also used to give intermediate levels on racks, etc. when horizontal
ties between uprights are not required.
There are currently no downloads for this product