KEE KLAMP TYPE 25, THREE SOCKET TEE

Product CodeNamePrice EachQuantity Qty
208MPG2" NB, 60.3MM OD

£ excl. VAT (£ inc. VAT)

1
208PMH3/4"

£ excl. VAT (£ inc. VAT)

1
208MPF1.1/2" NB, 48.3MM OD

£ excl. VAT (£ inc. VAT)

1
208MPE1.1/4" NB, 42.4MM OD

£ excl. VAT (£ inc. VAT)

1
208MPD1" NB, 33.7MM OD

£ excl. VAT (£ inc. VAT)

1

KEE KLAMP type 25, three socket tee. Most commonly used as the 90 degree joint between the top rail and an intermediate upright on safety railing. As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal tube.
The Type 10 fitting can be used as an alternative when a join in the tube is not required.

Sizing refers to the size of pipe onto which the fittings can be applied. We show sizing for both Nominal Bore (NB) - the internal pipe diameter, and Outside Diameter (OD) - the diamater of the pipe measured accross its total width.

Please note the medium galvanised steel pipe available elsewhere on this site is sized exclusively by its Nominal Bore.