KEE KLAMP TYPE 10, SINGLE SOCKET TEE

Product CodeNamePrice EachQuantity Qty
208MMDD2" X 1.1/2" NB

£ excl. VAT (£ inc. VAT)

1
208MMCA1.1/2" X 1.1/4" NB

£ excl. VAT (£ inc. VAT)

1
208MMA1" NB, 33.7MM OD

£ excl. VAT (£ inc. VAT)

1
208MMB1.1/4" NB, 42.4MM OD

£ excl. VAT (£ inc. VAT)

1
208MMC1.1/2" NB, 48.3MM OD

£ excl. VAT (£ inc. VAT)

1
208MLY1/2" NB, 21.3MM OD

£ excl. VAT (£ inc. VAT)

1
208MMD2" NB, 60.3MM OD

£ excl. VAT (£ inc. VAT)

1
208MMBB1.1/4" X 1" NB

£ excl. VAT (£ inc. VAT)

1

KEE KLAMP type 10, single socket tee. The Tee''s are designed to give a 90 degre butt joint between two tubes.Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level.
Also for base ties on racking.

Sizing refers to the size of pipe onto which the fittings can be applied. We show sizing for both Nominal Bore (NB) - the internal pipe diameter, and Outside Diameter (OD) - the diamater of the pipe measured accross its total width.

Please note the medium galvanised steel pipe available elsewhere on this site is sized exclusively by its Nominal Bore.