0 items | £0.00
KEE KLAMP 363 ANGLE BASE FLANGE
Kee Klamp 363 galvanised malleable angled base flange. Similar to Type 62, but used to set up the upright at an angle between 45° to 60°. This fitting should only be subjected to light loads which
cannot be positioned at 90° to the applied load. For greater loads or other tube sizes, a Type 62 flange
is used and the upright bent to the required angle
Sizing refers to the size of pipe onto which the fittings can be applied. We show sizing for both Nominal Bore (NB) - the internal pipe diameter, and Outside Diameter (OD) - the diameter of the pipe measured across its total width.
Please note the medium galvanised steel pipe available elsewhere on this site is sized exclusively by its Nominal Bore.