ZS Series 2 Port, 2 Way Solenoid Valves, Nitrile Seals & Brass Bodies, Zero Pressure Differential, Normally Open

Product CodeNamePriceQuantity Qty
239BCZ1" 25MM 230AC 3

£ excl. VAT (£ inc. VAT)

1
239BDG1.1/2" 40MM 110AC 3

£ excl. VAT (£ inc. VAT)

1
239BDM2" 50MM 24AC 3

£ excl. VAT (£ inc. VAT)

1
239BCS1/2" 16MM 24AC 3

£ excl. VAT (£ inc. VAT)

1
239BCM3/8" 16MM 110AC 3

£ excl. VAT (£ inc. VAT)

1
239BDK2" 50MM 110AC 3

£ excl. VAT (£ inc. VAT)

1
239BDJ1.1/2" 40MM 24DC 3

£ excl. VAT (£ inc. VAT)

1
239BCX3/4" 20MM 24DC 3

£ excl. VAT (£ inc. VAT)

1
239BDL2" 50MM 230AC 3

£ excl. VAT (£ inc. VAT)

1
239BCW3/4" 20MM 24AC 3

£ excl. VAT (£ inc. VAT)

1
239BCQ1/2" 16MM 110AC 3

£ excl. VAT (£ inc. VAT)

1
239BCU3/4" 20MM 110AC 3

£ excl. VAT (£ inc. VAT)

1
239BCO3/8" 16MM 24AC 3

£ excl. VAT (£ inc. VAT)

1
239BCN3/8" 16MM 230AC 3

£ excl. VAT (£ inc. VAT)

1
239BDE1.1/4" 35MM 24AC 3

£ excl. VAT (£ inc. VAT)

1
239BCY1" 25MM 110AC 3

£ excl. VAT (£ inc. VAT)

1
239BDD1.1/4" 35MM 230AC 3

£ excl. VAT (£ inc. VAT)

1
239BDI1.1/2" 40MM 24AC 3

£ excl. VAT (£ inc. VAT)

1
239BCP3/8" 16MM 24DC 3

£ excl. VAT (£ inc. VAT)

1
239BCV3/4" 20MM 230AC 3

£ excl. VAT (£ inc. VAT)

1
239BDB1" 25MM 24DC 3

£ excl. VAT (£ inc. VAT)

1
239BDH1.1/2" 40MM 230AC 3

£ excl. VAT (£ inc. VAT)

1
239BCR1/2" 16MM 230AC 3

£ excl. VAT (£ inc. VAT)

1
239BDN2" 50MM 24DC 3

£ excl. VAT (£ inc. VAT)

1
239BDF1.1/4" 35MM 24DC 3

£ excl. VAT (£ inc. VAT)

1
239BDC1.1/4" 35MM 110AC 3

£ excl. VAT (£ inc. VAT)

1
239BDA1" 25MM 24AC 3

£ excl. VAT (£ inc. VAT)

1
239BCT1/2" 16MM 24DC 3

£ excl. VAT (£ inc. VAT)

1

The ZS series 2 port, 2 way (2/2) solenoid valves from Albion are typically used for automatic closing and opening on all kinds of pipework.

For orifice sizes 10mm and below these valves are direct acting, for those 15mm and above the operation is sub-step direct acting via a pilot port. This series have Nitrile Rubber seals and Brass Bodies and are normally open.

They are unsuitable for use with steam, very good for oil, and good for general water and diulte chemical usage including acids and bases. They can also be used with water. They have a maximum working temperature of 80 Celsius and a low of -5 Celsius.

Sizing covers the Port Size in inches, the Orifice Size in mm, Voltage and the Maximum Operating Pressure in bar for either gas, liquid or oil, whichever is the lowest.