ZS Series 2 Port, 2 Way Solenoid Valves FPM (Viton) Seals & Brass Bodies, Zero Pressure Differential, Normally Closed

Product CodeNamePrice EachQuantity Qty
239BBX1" 25MM 230AC 3

£ excl. VAT (£ inc. VAT)

1
239BBQ1/2" 10MM 24AC 16

£ excl. VAT (£ inc. VAT)

1
239BCG1.1/2" 40MM 24AC 7

£ excl. VAT (£ inc. VAT)

1
239BBW1" 25MM 110AC 3

£ excl. VAT (£ inc. VAT)

1
239BBK3/8" 10MM 110AC 16

£ excl. VAT (£ inc. VAT)

1
239BCL2" 50MM 110AC 4

£ excl. VAT (£ inc. VAT)

1
239BBJ1/4" 10MM 24DC 16

£ excl. VAT (£ inc. VAT)

1
239BBZ1" 25MM 24DC 3

£ excl. VAT (£ inc. VAT)

1
239BCK2" 50MM 24AC 7

£ excl. VAT (£ inc. VAT)

1
239BBU3/4" 20MM 24AC 7

£ excl. VAT (£ inc. VAT)

1
239BBS3/4" 20MM 110AC 7

£ excl. VAT (£ inc. VAT)

1
239BCE1.1/2" 40MM 110AC 7

£ excl. VAT (£ inc. VAT)

1
239BCI2" 50MM 110AC 7

£ excl. VAT (£ inc. VAT)

1
239BCH1.1/2" 40MM 24DC 4

£ excl. VAT (£ inc. VAT)

1
239BCB1.1/4" 35MM 230AC 7

£ excl. VAT (£ inc. VAT)

1
239BBT3/4" 20MM 230AC 7

£ excl. VAT (£ inc. VAT)

1
239BCD1.1/4" 35MM 24DC 4

£ excl. VAT (£ inc. VAT)

1
239BBP1/2" 10MM 230AC 16

£ excl. VAT (£ inc. VAT)

1
239BBI1/4" 10MM 24AC 16

£ excl. VAT (£ inc. VAT)

1
239BCC1.1/4" 35MM 24AC 7

£ excl. VAT (£ inc. VAT)

1
239BBH1/4" 10MM 230AC 16

£ excl. VAT (£ inc. VAT)

1
239BBN3/8" 10MM 24DC 16

£ excl. VAT (£ inc. VAT)

1
239BCF1.1/2" 40MM 230AC 7

£ excl. VAT (£ inc. VAT)

1
239BBO1/2" 10MM 110AC 16

£ excl. VAT (£ inc. VAT)

1
239BCA1.1/4" 35MM 110AC 7

£ excl. VAT (£ inc. VAT)

1
239BBL3/8" 10MM 230AC 16

£ excl. VAT (£ inc. VAT)

1
239BCJ2" 50MM 230AC 7

£ excl. VAT (£ inc. VAT)

1
239BBV3/4" 20MM 24DC 4

£ excl. VAT (£ inc. VAT)

1
239BBY1" 25MM 24AC 3

£ excl. VAT (£ inc. VAT)

1
239BBR1/2" 10MM 24DC 16

£ excl. VAT (£ inc. VAT)

1
239BBG1/4" 10MM 110AC 16

£ excl. VAT (£ inc. VAT)

1
239BBM3/8" 10MM 24AC 16

£ excl. VAT (£ inc. VAT)

1

The ZS series 2 port, 2 way (2/2) solenoid valves are typically used for automatic closing and opening on all kinds of pipework.

For orifice sizes 10mm and below these valves are direct acting, for those 15mm and above the operation is sub-step direct acting via a pilot port.

This series have FPM (Viton) seals and Brass Bodies and are Normally Closed. They are unsuitable for use with steam, very good for oil and chemcial resistance, and can also be used with water. They have a maximum working temperature of 120 Celsius and a minimum of -20 Celsius.

Sizing covers the Port Size in inches, the Orifice Size in mm, Voltage and the Maximum Operating Pressure in bar for either gas, liquid or oil, whichever is the lowest.